TPV
Filler breather with valve
Technical Sheet
Material
Plug made from thermoplastic material (Polyamide 66) ensuring high mechanical resistance at both low and high temperatures.
Dimensional stability and shock resistance.
NBR 70 Shore, oil resistant, O-Ring seal.
Description
Cylindrical-headed filler breather with vertical ribs for a better grip.
For its large breathing capacity, it is recommended to be used on hydraulic plants or tanks containing liquids which are subject to quick volume changes, where a rapid air outlet or the recall og large air volumes are needed and generally without oil splashes.
Seal by means of two NBR 70 Shore O-Ring seals, located in the special seats.
The one-way valve (controlled by a spring set at 0.20-0.25 bar) allows the venting.
It also prevents the entry of impurities inside and the oil spillage outside, compatibly with the work conditions and the kind of oil which is used.
It is used in applications where an outside air discharge, due to an internal overpressure.
Colour
Black with red lid.
Assembly
Press-fit assembly on holes of the requested diameter (tolerance on the hole ±0.1 with an acceptance chamfer of 1/45°).
Notes
The plugs are supplied with "valve" graphic symbol, as standard equipment.
Package
1 - 50 - 100 pcs.
2D and 3D technical drawing
To download the 2D and 3D drawings, you must be registered to Thenar's website.
If you are already registered, do the login here.
Login failed or account not yet been confirmed
Aren't you registered?
Registration not yet confirmed
To download the 2D and 3D drawings, you must wait for Thenar's authorization. When you are authorized, you will be notified by email.
If you want to ask for the authorization to download the drawings, please click here:
FOLLOW US ON