TSAV
Filler breather with valve and dipstick
Technical Sheet
Material
Plug made from thermoplastic material (Polyamide 66). Phosphated steel dipstick, round section.
Seal with flat washer or, upon request, with O-Ring, both in (NBR) 70 Shore.
Description
Cylindrical-headed filler breather with vertical ribs for an optimal grip. Manual tightening.
Dipstick with 195 mm standard length (measured from the end stop.)
It is used in applications where an outside air discharge is needed, due to an internal overpressure.
The one-way valve (controlled by a spring set at 0,20-0,25 bar) enables the venting.
It also prevents the entry of impurities inside and the oil spillage outside (compatibly with the work conditions and the kind of oil which is used).
Application suggested on gear reducers, converters, multipliers, gearboxes and trasmission components in general. Airflow capacity (P) shown in the table expressed in litres/minute, measured with a pressure of 50 mbar.
Colour
Black with red lid.
Notes
The plugs are supplied with "valve" graphic symbol, as standard equipment.
For suitable quantities the lid can be customized with a company logo.
Upon request and for quantities at least of 250 pieces, the dipstick can be supplied in different lengths and with "min-max" notches.
Package
1 - 50 - 100 pcs.
2D and 3D technical drawing
To download the 2D and 3D drawings, you must be registered to Thenar's website.
If you are already registered, do the login here.
Login failed or account not yet been confirmed
Aren't you registered?
Registration not yet confirmed
To download the 2D and 3D drawings, you must wait for Thenar's authorization. When you are authorized, you will be notified by email.
If you want to ask for the authorization to download the drawings, please click here:
FOLLOW US ON