TPF
Filler breather with filter
Technical Sheet
Material
Plug made from thermoplastic material (Polyamide 66) ensuring high mechanical resistance at both low and high temperatures. Dimensional stability and shock resistance.
Oil resistant, (NBR) 70 Shore O-Ring seal. Polyurethane foam air filter.
Description
Cylindrical-headed filler breather with vertical ribs for a better grip.
For its large breathing capacity, it is recommended to be used on hydraulic plants or tanks containing liquids which are subject to quick volume changes, where a rapid air outlet or the recall of large air volumes are needed and generally without oil splashes.
Polyurethane foam air filter (indicative filtration degree 50 microns) which can be easily replaced, by taking off the red lid.
Seal by means of two NBR 70 Shore O-Ring seals, located in the special seats. Airflow capacity (P) shown in the table expressed in litres/minute, measured with a pressure of 50 mbar.
Colour
Black with red lid.
Assembly
Press-fit assembly on holes of the requested diameter (tolerance on the hole ±0,1 with an acceptance chamfer of 1/45°).
Notes
The plugs are supplied, as standard equipment, with oil fill graphic symbol and OIL text.
Package
1 - 50 - 100 pcs.
2D and 3D technical drawing
To download the 2D and 3D drawings, you must be registered to Thenar's website.
If you are already registered, do the login here.
Login failed or account not yet been confirmed
Aren't you registered?
Registration not yet confirmed
To download the 2D and 3D drawings, you must wait for Thenar's authorization. When you are authorized, you will be notified by email.
If you want to ask for the authorization to download the drawings, please click here:
FOLLOW US ON