TMDV
Filler breather with air vent valve
Technical Sheet
Material
Plug made from thermoplastic material (Polyamide 66) ensuring a high mechanical resistance at both low and high temperatures, dimensional stability and shock resistance.
Oil resistance 70 Shore O-ring rubber seal.
Description
Cylindrical-headed filler breather with vertical ribs for an optimal grip. Hand tightening. Equipped with one-way valve.
It is used in applications where an outside air discharge is needed, due to an internal overpressure.
The check valve (controlled by a spring set at 0,20-0,25 bar) allows the venting.
It also prevents the entry of impurities inside and the oil spillage outside (compatibly with the work conditions and the kind of oil which is used).
Application suggested on gear reducers, converters, multipliers, gearboxes and transmission components in general. Airflow capacity (P) shown in the table expressed in litres/minute, measured with a pressure of 300/400 mbar.
Colour
Black with red lid.
Notes
The plugs are supplied with "valve" graphic symbol, as standard equipment.
Package
1 - 50 - 100 pcs.
2D and 3D technical drawing
To download the 2D and 3D drawings, you must be registered to Thenar's website.
If you are already registered, do the login here.
Login failed or account not yet been confirmed
Aren't you registered?
Registration not yet confirmed
To download the 2D and 3D drawings, you must wait for Thenar's authorization. When you are authorized, you will be notified by email.
If you want to ask for the authorization to download the drawings, please click here:
FOLLOW US ON