TMDV-DS70
Double-valve pressurized filler breather with filter
Technical Sheet
Material
Plug made from thermoplastic material (Polyamide 66) ensuring a high mechanical resistance at both low and high temperatures, dimensional stability and shock resistance.
Polyurethane foam air filter (indicative filtration degree 40 microns).
Seal with O-ring rubber synthetic oil resistant 70 Shore seated in the seat.
Description
Cyclindrical-headed breather and filler plug diam. 70 mm with vertical ribs for an optimal grip.
Inside the plug there is a plastic block with a double-valve system: a safety valve set at 0,35 bar (+/-0,2) and an inlet valve set at approximately 0,05 bars.
The air filter withholds the impurities and the safety valve protects from oil spillages in mobile or self-propelled applications.
The use of this model is recommended in all hydraulic applications where an airflow controlled in both directions is needed: outwards when there is an internal overpressure and inwards when, once the level of the liquid into the tank decreases, an internal depression is produced. P1: outlet airflow capacity measured in litres/minute at 400 mbar.
P2: inlet airflow capacity measured in litres/minute at 50 mbar.
Colour
Black body and lid.
Notes
The plugs are supplied, as standard equipment, with "double valve" graphic symbol.
Package
1 - 50 - 100 pcs.
2D and 3D technical drawing
To download the 2D and 3D drawings, you must be registered to Thenar's website.
If you are already registered, do the login here.
Login failed or account not yet been confirmed
Aren't you registered?
Registration not yet confirmed
To download the 2D and 3D drawings, you must wait for Thenar's authorization. When you are authorized, you will be notified by email.
If you want to ask for the authorization to download the drawings, please click here:
FOLLOW US ON